Palram Canopia Sophia XL 3000 Grey Clear Door Canopy 2.86m x 1.4m

The Palram Canopia Sophia XL 3000 Grey Clear Door Canopy (706974BUN) is a large modern flat-roof style canopy measuring 2.86m wide and 1.4m deep. That projection gives serious shelter over a doorway and window. It suits wider doorways and front porches where standard canopies fall short.

The canopy sheet is a 4mm high-impact acrylic panel that is virtually unbreakable and transmits 85% of light while blocking 100% of UV rays. The panel sits in a powder-coated aluminium profile supported by laser-cut powder-coated galvanised-steel brackets that are fully rust-resistant. The whole structure is tested to withstand winds up to 93mph and snow loads of 37lbs/ft².

A front aluminium gutter channels rainwater sideways away from the door rather than letting it drip down. A hidden rear rubber gasket seals the canopy tight to the wall to stop water seeping behind it. The kit includes a pre-cut panel, pre-drilled profiles and all mounting hardware for straightforward DIY fitting.

The screw-free locking system eliminates any leak risk through the panel. It is completely maintenance free, made from recyclable materials and backed by a 3-year limited warranty. Multiple panels can be fitted side by side for wider coverage.

The Sophia XL 3000 uses a 4mm high-impact acrylic sheet that is 100% UV-stabilised and transmits 85% of natural light. It will not discolour or fade. The sheet locks into a powder-coated aluminium profile using a screw-free fast-lock system that removes any risk of leaks through the panel. Laser-cut galvanised-steel brackets support the structure and are fully rust-resistant. A front aluminium gutter drains water sideways. A rear rubber gasket seals the unit to the wall. The structure handles winds to 93mph and snow loads to 37lbs/ft².

The canopy sheet is 4mm high-impact acrylic, 100% UV-protected and virtually unbreakable. The frame profile is powder-coated aluminium. The support brackets are laser-cut galvanised steel with a powder-coat finish making them fully rust-resistant. All materials are recyclable.

The kit includes a pre-cut acrylic panel, pre-drilled aluminium profiles and all mounting hardware. It is designed for DIY assembly on masonry walls such as brick or block. The screw-free fast-lock panel system speeds up installation and removes leak risk. Two people are recommended given the 87kg packaged weight. Fitting time will vary but the pre-drilled profiles keep the process straightforward. Check that your wall fixings suit your specific substrate before starting.